鑄鐵閘門使用保養
Operation and Maintenance of Cast Iron Gate
1閘門在啟閉時應注意閘板的上、下極限位置,不能超限,以免損壞閘門或啟閉機。
When opening and closing the gate, attention should be paid to the upper
and lower limit positions of the gate, so as not to exceed the limit,
so as to avoid damaging the gate or the hoist.
2閘門在啟閉過程中如有異白鋼雕塑 小型滾揉機 防火電纜 托輥設備 水刀切割機 銅鐘 石雕獅子 校園不銹鋼雕塑 扭王塊模具常情況應立即停止使用,及時檢查修理。
www.laoniangongyu56.com www.zaoxingji.com.cn www.shejimoju.com
www.ldgcasting.com www.hslcasting.com.cn www.bdhxnt.comIf abnormal
conditions occur during the opening and closing of the gate, it should
be stopped immediately and checked and repaired in time.
3閘門在關閉時距閘底10公分處,暫停1min,讓激流沖凈底門槽內雜物,然后再將閘門關閉。
3. When the gate is closed, it is 10 cm away from the bottom of the
gate, suspend for 1 minute, let the torrent wash away the debris in the
groove of the bottom gate, and then close the gate.